Xing Hongtai——The reason why the appearance of the solder wire is not bright

In the process of using the solder wire, we will encounter the appearance of the tin wire of individual rolls is not bright, black, tin wire is irregular, there are joints, etc. These phenomena will be explained one by one for everyone:

 
The solder wire is surface-treated during the drawing process. In order to ensure that the tin wire of different degrees has a bright and smooth appearance, it is then wound; when winding, the wire must pass through multiple gears to be wound on the adhesive. , But the gear is too dirty, there is lubricating oil or winding hands with moisture to touch the wire will make the wire black and oxidized; when the warehouse where the tin is stored is too humid, the surface of the wire will also be black, and the appearance will be black There is no difference in the use of such products, and there is no problem in general use.

Neatness of solder wire: It is the basic standard required by each manufacturer. Neatness is related to equipment, control technology, operators, and the tin wire itself (no connector). We will try to avoid this situation during the production process.

Solder wire has a joint: during the winding process, the thinner the wire diameter, the larger the winding tension, the faster the winding speed, etc. will cause the wire to break during winding. To be able to wind a whole roll, only The two wires are connected together and then the winding is continued. The tin wire with the joint does not affect the quality of the general welding, but the tin wire may be automatically sent during the welding of the automatic soldering station, which may be stuck due to the oversized joint. Inconvenience, this section can be cut off in this situation, so customers must understand and support when using tin wire. If you encounter these problems, you can contact the supplier to resolve them as soon as possible. These are all Small problem, it has no direct impact on the quality of the solder wire.

Shenzhen Xinghongtai Tin Co., Ltd. is a professional solder wire manufacturer.It has been focusing on the research and development of solder wire for 12 years.It provides solder wires, lead-free solder wires, lead solder wires, solder wires, solder bars and solder wires of different specifications.